Implementing a Goverlan Reach Server
The Goverlan Reach Server is a software component that can be installed on 64-bit only Windows Server 2008 R2 or later.
Implementing a Goverlan Reach Server infrastructure is done via the following 3 steps:
The Goverlan Reach Server requires an active sign-on account to start. By default, each Goverlan account is provisioned with a single Goverlan Reach Server license.
A GRS license can only be used to sign into a single GRS server. However, you can generate an unlimited number of GRS licenses free of charge. Login to my.goverlan.com, select the Goverlan Reach Server product under the Licenses section, and click on the Add License option.
Installing the Goverlan Reach Server
Download and Install the GRS
The latest Goverlan Reach Server can be downloaded by logging into the my.goverlan.com portal, selecting the Goverlan Reach Server tab and clicking on Download Product.
Minimum System Requirements: The Goverlan Reach Server software can be installed on any 64-bit only Windows Server 2008 R2 or later operating system with a minimum of 4GB of RAM and 200MB of available disk space.
Configure Reach Server
Open the Server Configuration window and configure the following options:
A GRS can be a primary server or a dependent server. The primary (master) server is the one installed within the authoritative site (the site where Goverlan operators reside).
If this is your first GRS, keep this setting as the Primary Goverlan Reach Server.
The Server Listening Port is the port exposed on the internal side of the network. This port is used to provide GRS services to your machines. This port should be reachable by all of your machines within the private infrastructure.
The default port number is 22100.
Server Services Authentication
Enter the user ID and password that will be used start the Goverlan Reach Server and Goverlan Reach Gateway Services.
This account needs to have the following privileges:
- Log on as a service permission
- Local Administrator permission on the server itself
- DB Creator rights if using an MS SQL Server (Optional)
By default, the GRS installer will automatically install the LocalDB database. The file-based database can accommodate medium sized networks of 500 or less nodes. No further configuration is necessary for the LocalDB database.
For larger networks, use the GRS settings to switch to a MS SQL Server/Express instance for the database after the installer has completed.
SQL Server Configuration
Change the database type to Microsoft SQL Server and enter the SQL Server details. The Service Account configured in Server Services Authentication is used when Windows Authentication is selected.
If SQL Authentication is required, change the authentication method and enter the SQL account credentials.
Start your Engine
This completes the minimum setting requirements. Click on OK to close the configuration window. Once completed the following message will be displayed:
Click on Start the Server